Can a power station run an electric clothes dryer?
Usually not a portable one. A typical US electric dryer is a 240 V appliance with a heating element of about 5,000 W, and a portable station is normally 120 V with a 1,000 to 3,000 W output. A load also uses roughly 3 kWh, more than most stations hold. A gas dryer, a heat pump dryer or a clothesline fits a backup system far better.
Typical numbers
| Item | Typical running | Typical start-up surge | 1 hour at 60% duty |
|---|---|---|---|
| Electric clothes dryer, 240 V | about 5,000 W while heating | about 5,000 W (element, small motor surge) | about 3,000 Wh |
Typical values: the element cycles on and off, so the average is about 60% of the peak. Dryer nameplates vary; the label on yours gives its rated load, and the circuit is commonly a 30 A breaker. A gas dryer uses only the drum motor and controls, roughly 300 to 500 W, but still needs power.
Worked example
5,000 W × 1 h × 0.60 = 3,000 Wh for each hour of drying. With 85% of rated capacity usable:
| Battery rating | Usable | Hours of dryer use |
|---|---|---|
| 2,000 Wh | 1,700 Wh | about 0.6 hours |
| 5,000 Wh | 4,250 Wh | about 1.4 hours |
| 10,000 Wh | 8,500 Wh | about 2.8 hours |
Good to know
- Power, not just energy, is the limit. The station must supply about 5,000 W at 240 V. Most portable stations cannot.
- A dryer is on a dedicated 240 V circuit (commonly a 30 A breaker). Powering it needs an inlet with an interlock or transfer switch, or a battery system installed by a licensed electrician. Never back-feed a panel with a cord. Local amendments apply and a permit may be required.
- Cheaper: skip the dryer during an outage. A clothesline or rack costs nothing, and a spin cycle in the washing machine removes most of the water first.
- Planning a switch? A heat pump dryer uses roughly a third of the energy, see appliance switch cost compare, and plan the whole load with the home battery size tool.
Open the calculator with an electric dryer filled in
Appliance figures are typical values, not measurements of your device: the label or a clamp meter on yours wins. The sums assume 85% of a battery's rated capacity reaches your outlets (how the numbers work). We list no prices and have not hands-on tested any product.