Size My Backup

Can a power station run a garage door opener?

A typical garage door opener draws about 500 W for the few seconds it moves the door and has a start-up surge near 1,000 W. Each opening or closing uses only a few watt-hours, so even a 1 kWh power station can cycle the door hundreds of times.

Typical numbers

ItemTypical runningTypical start-up surgeEnergy per cycle
Garage door openerabout 500 W while the door movesabout 1,000 Wabout 3 Wh for a 20-second cycle

Typical values for a chain- or belt-drive opener with a 1/2 HP class motor. Opener power varies by model and a standby light or receiver draws a few watts all the time. Check the label on yours.

Worked example

500 W × 20 seconds = about 3 Wh per opening or closing. With 85% of rated capacity usable, and ignoring everything else the station powers:

Battery ratingUsableCycles (open or close)
1,000 Wh850 Whhundreds (about 280 on paper)
2,000 Wh1,700 Whover 500
3,000 Wh2,550 Whover 800

The limit is the surge, not the energy: check that the station's surge rating covers about 1,000 W (most 1,000 W-class stations do).

Good to know

Open the calculator with a garage door opener filled in

Appliance figures are typical values, not measurements of your device: the label or a plug-in watt meter on yours wins. The sums assume 85% of a battery's rated capacity reaches your outlets (how the numbers work). We list no prices and have not hands-on tested any product.

Back to the calculator · Fridge · Lights, phones and TV · Washing machine